Description

---

 

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Loose tubes are filled with water proof compound to ensure compact and longitudinally water blocking, then warpped by aluminum tape. This part of cable accompanied with the wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.

 

Characteristis

‍

---

 

•  Good mechanical and temperature performance
•  High strength loose tube that is hydrolysis resistant
•  Special tube filling compound ensure a critical protection of fiber
•  Small outer diameter and light weight are  easy to installation
•  Two parallel steel wires ensure tensile strength
•  PE sheath protects cable from ultraviolet radiation

 

  

 

Technical Parameters

‍

---

 

Fiber Type	Attenuation(+20℃）				Bandwidth		Numerical   Aperture	Cable   Cut-off Waverlength λcc
	@850   nm	@1300   nm	@1310   nm	@1550   nm	@850   nm	@1300   nm
G.652	--	--	≤0.36dB/km	≤0.22dB/km	--	--	--	≤1260 nm
G.655	--	--	≤0.40dB/km	≤0.23dB/km	--	--	--	≤1450   nm
50/125 µm	≤3.3dB/km	≤1.2dB/km	--		≥500MHz·km	≥500MHz·km	0.200±0.015NA	--
625/125   µm	≤3.5dB/km	≤1.2dB/km	--		≥200MHz·km	≥500MHz·km	0.200±0.015NA	--

 

 

Production Line

---

• 20 Sets Armoring Machines 

• 8 Bow-type Optic Cable Production Lines 

• 2 Indoor Cable Production Lines 

• 8 Outdoor Cable Jacket Production Lines 

• Professional Patch Cord Production Lines 

Package and Transportation

---

Production Process

---

Material Inspection Report

---

Test Equipment

---

Testing Subject

---

• Fiber performance inspection 

• Cable length 

• External dimensions 

• Tearing force 

• Fiber eccentricity 

• Minimum thickness inspection 

• Fiber tightness inspection 

• Steel wire testing 

• Strength Member testing 

• Clear and correct coding on cable 

• To roll the cable neatly 

• Flaming test 

• Low friction test